AB707 Sealanhtp of Aswin Enterprise : We Build Confidance

Home

PRODUCTS RANGE

	Aswin Enterprise
	Vacuum Impregnation Plant
	AB707 Sealanhtp
	Process
	Porosity

	Aswin Industries
	All Seal Epoxy Putty
	All Joins CPVC to CPVC
	All Joins PVC & UPVC
	All Fix SR
	All Fix LLB
	Sealent AB-700-HS Metal Bond
	All Tight
	All Quick PS

historic background

Aswin Enterprise was started as a small scale industrial unit in 1973 by Late Mr. Babubhai P. Patel He. was a small time entrapreuner, with high business ethics and morals. Hardworking & Innovative by nature,

Home | E-mail

AB707 Sealanhtp

Outstanding Features for better sealing with AB707 sealant.

	Sealant in monomar acreylic base.
	100% Solid thermosetting sealant.
	Balanced viscosity ensure deep peretation.
	Will not bleed out. Voids remain filled during polymerization, producing a virtually indestructible seal.
	Cured AB707 is resistant to fuels, oils, alcohols, glycols, solvents, salts, mild acids and freons.
	Completely uninhibited by copper base alloy.
	Resist against temperature upto 450 c. The sealant will not repture when the casting is subjected to extreme thermal or physical shock.
	Resist hydraulic pressure up to 10,000 P.S.I.
	Will not discolor or distort parts, not it will affect established critical tolerance of machined parts.

Outstanding features for low cost and ease of "inplant" operation of AB707 sealant.

	Aswin AB707 Sealant : Polyfunctional Methacrylate Monomer.
	It has excellent washability without the resin being left on the componeut.
	For curing the impregnated casting it is to be heated to 90 c in hot water for the polymerization of the resin within the metal.
	The renge of Aswin AB707 resin take just 2 to 3 minutes when heated to 90 c and it take just 10 minutes for the full polymerization
	Extremely stable.
	Biodearadable & non injurious to human body.
	Low viscosity and high polarity ensure deep penetration, low material consumption and consequently, a lower cost per unit.
	Resist hydraulic pressure up to 10,000 P.S.I.
	Will not discolor or distort parts, not it will affect established critical tolerance of machined parts.
	Does not emit disagreeable odour and therefore should not required any special ventilation.
	Provides quick positive cure for short cycle operation.
	Parts are ready for testing and can be used immediately after drying.
	Ensure a permanent seal and will last for the life of componeut
	Shelf life 15 months, if catalyst is not added.

Product Composition	Aswin Sealant AB707 Polyfuntion Methacrylate Momomer
UNCURED PROPERTIES
Colour	Clear, Pale Straw Coloured
Viscosity at 25 deg.	31±1
Flashpoint (PMCC) deg. C	> 150
Specific gravity at 25 C	1.004-1.006
Odour	Mild
Flourescent	Yes
Gel time at 90 C (0.2% AZDN Catalyst)	Approximately 3 minutes
Shelf Life.	Indefinite under recommended operating condition

Meets with the specification : IS – 12799 - 1989

website designing, e commerce, seo By Innovative Ecom